Error Code Brother ADS3600W - Download Brother ADS3600W Driver

Error Code Brother ADS3600W-Download Brother ADS3600W Driver-Brother ADS3600W

Buy on Amazon Brother AD3600W

Download Brother ADS3600W Driver

Download Service Manuals Brother AD3600W

Brother AD3600W Error Code List

brother ads 3600w driver

brother ads 3600w support

brother ads 4900w

brother ads-3600w driver

brother ads-3600w support

brother ads-4900w

brother ads3600w

brother ads3600w driver

brother ads3600w manual

brother ads3600w software

brother ads3600w scanner

escaner brother ads3600w

brother ads3600w treiber

toner brother ads3600w

brother wishes for brother day

brother brother quotes

scanner brother ads3600w

brother ads3600wux1

what do i say to my brother

Find official Brother ADS3600W FAQs, videos, manuals, drivers and downloads here. Get the answers, technical support, and contact options you are looking ...

Brother ADS3600W | High-Speed Wireless Document ...

ADS3600W ; High-Speed Duplex Scanning. Scans single and double-sided materials in a single pass, in both color and black/white, at up to 50ppm‡ to help maximize ...

Scanning Speed ‡ (ppm): Color and monochr...

Scan Drivers Included ‡: ISIS driver not availa...

Duplex Scan Speed ‡ (ipm): Color and monoc...

Scan to Features: When connected to a PC with ...

Brother ADS-3600W Wireless Desktop Document Scanner with professional software bundle Offering multiple connection options including Wired and Wireless ...

ADS-3600W Desktop Document Scanner

Code: 8100

Description:

A document longer than the specified length was set and scanned.

Remedy:

<User Check> • Set the document length within the standard.

1 Dirt on the eject roller Clean the eject roller. 2 Feed belt failure Replace the feed belt. 3 Feed motor failure Replace the feed motor. 4 Main PCB failure Replace the main PCB ASSY.

Code: A200

Description:

The first side document scanning position sensor detected that the document length was 90 cm or more while scanning a document.

Remedy:

<User Check> • Set the document length within the standard. • Remove the jammed document.

1 First side document scanning position actuator caught in sections of the machine Reattach the first side document scanning position actuator. 2 First side document scanning position sensor failure Replace the first side document scanning position sensor PCB. 3 Main PCB failure Replace the main PCB ASSY.

Code: A300

Description:

The document scanning position sensor has not detected the document passing even after the document has been fed for the specified time.

Remedy:

<User Check> • Set a document within the specified size in the ADF correctly. • Remove the jammed document.

1 Document scanning position actuator coming off Reattach the document scanning position actuator. 2 Connection failure of the first side document scanning position sensor harness Reconnect the first side document scanning position sensor harness. 3 Document scanning position sensor failure Replace the document scanning position sensor PCB ASSY. 4 Main PCB failure Replace the main PCB ASSY.

Code: A400

Description:

The front cover sensor detected an open front cover.

Remedy:

<User Check> • Close the front cover correctly.

1 Connection failure of the front cover sensor harness Reconnect the front cover sensor harness. 2 Front cover sensor attachment failure Reattach the front cover sensor. 3 Front cover sensor failure Replace the front cover sensor. 4 Main PCB failure Replace the main PCB ASSY.

Code: A700

Description:

Color parameter in the ROM does not match the first side or second side CIS.

Remedy:

1 Old firmware Install the latest version of the firmware. 2 First side or second side CIS unit failure Replace the first side or second side CIS unit. 3 Main PCB failure Replace the main PCB ASSY.

Code: A900

Description:

A scanning error occurred while scanning the image.

Remedy:

1 Program malfunction Install the latest version of the firmware. 2 First side or second side CIS unit failure Replace the first side or second side CIS unit. 3 Main PCB failure Replace the main PCB ASSY.

Code: AB00

Description:

The multi feeding sensor detected multiple documents.

Remedy:

<User Check> • Check that the thickness of the document is within the standard. • Check that the number of documents set in each tray is within the standard. • Moisten a soft cloth with cleaning solution. Gently and evenly wipe the pick up roller and reverse roller perpendicular to the direction of the rotation with the cloth to clean it. Note: Do not use any solution except the one packaged in the accessory (ethanol or detergent on the market). Failure to keep this instruction may cause the roller deterioration or machine break down.

1 Incorrect multi feeding sensor threshold setting Reset the multi feeding sensor threshold. 2 Multi feeding sensor (Sent/ Receive) failure Replace the multi feeding sensor (Sent/ Receive). 3 Main PCB failure Replace the main PCB ASSY.

Code: B000

Description:

Detected that the first side CIS flat cable or second side CIS flat cable was not inserted correctly.

Remedy:

1 Connection failure of the first side or second side CIS flat cable Reconnect the first side or second side CIS flat cable. 2 First side or second side CIS unit flat cable failure Replace the first side or second side CIS unit flat cable. 3 First side or second side CIS unit failure Replace the first side or second side CIS unit. 4 Main PCB failure Replace the main PCB ASSY.

Code: BB00

Description:

A white level not within the standard was scanned when function code 55 was executed.

Remedy:

1 Dirty calibration sheet Replace the calibration sheet with a new one. 2 First side or second side CIS unit failure Replace the first side or second side CIS unit. 3 Main PCB failure Replace the main PCB ASSY.

Code: BD00

Description:

A black level not within the standard was scanned when function code 55 was executed.

Remedy:

Code: D800

Description:

An error occurred while initializing the touch panel.

Remedy:

<User Check> • Check that nothing is on the touch panel.

1 Old firmware Install the latest version of the firmware. 2 Connection failure of the touch panel harness Reconnect the touch panel harness. 3 Touch panel failure Replace the touch panel ASSY. 4 Panel PCB failure Replace the panel PCB. 5 Main PCB failure Replace the main PCB ASSY.

Code: E000

Description:

An error occurred in the ROM check sum.

Remedy:

1 Program malfunction Install the latest version of the firmware. 2 Main PCB failure Replace the main PCB ASSY.

Code: E100

Description:

Program error

Remedy:

1 Program malfunction Install the latest version of the firmware. 2 Main PCB failure Replace the main PCB ASSY.

Code: E500

Description:

An error occurred during access to the DRAM in the main PCB ASSY.

Remedy:

1 Main PCB failure Replace the main PCB ASSY.

Code: E600

Description:

Write error in the EEPROM of the main PCB ASSY

Remedy:

1 Main PCB failure Replace the main PCB ASSY.

Code: E900

Description:

Failed to initialize the NFC module.

Remedy:

1 Connection failure of the panel PCB flat cable Reconnect the panel PCB flat cable. 2 Panel PCB failure Replace the panel PCB ASSY. 3 NFC PCB failure Replace the NFC PCB ASSY. 4 Main PCB failure Replace the main PCB ASSY.

Code: EC00

Description:

An USB device not within the specifications is connected to the USB terminal, resulting in overcurrent.

Remedy:

<User Check> • Disconnect the USB device from the USB terminal and turn the machine OFF. Turn the machine ON again after a while. • Replace the USB device with a different one.

1 USB host PCB failure Replace the USB host PCB ASSY. 2 Main PCB failure Replace the main PCB ASSY.

Code: F900

Description:

The country code was not entered correctly.

Remedy:

1 The country code was not entered correctly. Reenter the country code. (Refer to "Setting by country (function code: 74)") 2 Main PCB failure Replace the main PCB ASSY.