Dhcp Server - Dynamic Pool Settings | How to configure DHCP Server for D-Link DAP 2695 Access Point

How to configure DHCP Server for D-Link DAP 2695 Access Point

#configure_DHCP_Server_for_D_Link_DAP_2695_Access_Point #bestkitchengadgets2023 #techworld #dlink #accesspoint 

Dhcp Server; Dynamic Pool Settings - D-Link DAP-2695 . server. Function Enable/Disable: Dynamic Host Configuration Protocol (DHCP) assigns. dynamic IP addresses to devices on the network. This protocol.

How to configure DHCP Server for D-Link DAP 2695 Access Point

The DHCP address pool de nes the range of the IP address that can be assigned to stations in the network. A Dynamic Pool allows wireless stations.

configuring and managing the AP and enter telnet and IP address of DAP-2695 in the first line. Using the default IP address as example, enter telnet 

DHCP Server Dynamic Pool Settings

The DHCP address pool defines the range of the IP address that can be assigned to stations in the network. A Dynamic Pool allows wireless stations to receive an available IP with lease time control. If needed or required in the network, the DAP-2695 is capable of acting as a DHCP server.

Function Enable/Disable:

Dynamic Host Configuration Protocol (DHCP) assigns dynamic IP addresses to devices on the network. This protocol simplifies network management and allows new wireless devices to receive IP addresses automatically without the need to manually assign new IP addresses. Select Enable to allow the DAP-2695 to function as a DHCP server

IP Assigned From:

Input the first IP address available for assignment on your network

The Range of Pool (1-254):

Enter the number of IP addresses available for assignment.IP addresses are increments of the IP address specified in the"IP Assigned From" field.

Subnet Mask:

All devices in the network must have the same subnet mask to communicate. Enter the subnet mask for the network here.

Gateway:

Enter the IP address of the gateway on the network.

WINS:

Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that determines the IP address of a network computer that has a dynamically assigned IP address.

DNS:

Enter the IP address of the Domain Name System (DNS) server. The DNS server translates domain names such aswww.dlink.com into IP addresses.

Domain Name:

Enter the domain name of the network, if applicable. (An example of a domain name is: www.dlink.com.)

Lease Time:

The lease time is the period of time before the DHCP server will assign new IP addresses

d-link_dap-2695-router-default-login