Header Ads Widget

Canon Color imageCLASS MF632Cdw Error Codes List - Download Driver Canon Color imageCLASS MF632Cdw

 


Canon Color imageCLASS MF632Cdw Error Codes List - Download Driver Canon Color imageCLASS MF632Cdw
Canon Color imageCLASS MF632Cdw Error Codes List - Download Driver Canon Color imageCLASS MF632Cdw


Canon Color imageCLASS MF632Cdw Buy on amazon


Download Driver Canon Color imageCLASS MF632Cdw

Download Manuals Canon Color imageCLASS MF632Cdw


Canon Color imageCLASS MF632Cdw Error Codes List


Code: 0001

Description:

Delay Jam Document End Sensor

Causes:

SR10 ADF Pickup Feed Area

Remedy:

Code: 0002

Description:

Stationary Jam Document End Sensor

Causes:

SR10 ADF Pickup Feed Area

Remedy:

Code: 0021

Description:

Other Document End Sensor

Causes:

SR10 ADF Pickup Feed Area

Remedy:

Code: 0094

Description:

Power-on jam Document End Sensor

Causes:

SR10 ADF Pickup Feed Area

Remedy:

Code: 0104

Description:

Pickup Delay Jam 1

Causes:

Registration sensor/Multi-purpose Pickup Sensor

Remedy:

SR604/SR603 Cassette1/Multi-purpose Tray

Code: 0105

Description:

Pickup Delay Jam 2

Causes:

Registration sensor

Remedy:

SR604 Cassette1

Code: 014C
Description:
Fixing Delivery Delay Jam1
Causes:
Registration sensor/Fixing Delivery Sensor/Delivery Sensor
Remedy:
SR604/SR607/SR608 Cartridge to Fixing Roller Area.

Code: 0248
Description:
Pickup Stationary Jam 1
Causes:
Registration sensor/Fixing Delivery Sensor/Delivery Sensor
Remedy:
SR604/SR607/SR608 Registration Area to Cartridge.

Code: 0250
Description:
Fixing Delivery Stationary Jam 1
Causes:
Registration sensor/Fixing Delivery Sensor/Delivery Sensor
Remedy:
SR604/SR607/SR608 Fixing Roller to Delivery Area.

Code: 025C
Description:
Wrap Jam1
Causes:
Registration sensor/Fixing Delivery Sensor/Delivery Sensor
Remedy:
SR604/SR607/SR608 Fixing Roller to Delivery Area.

Code: 02A4
Description:
Duplex Re-pickup Assembly Jam1
Causes:
Registration sensor
Remedy:
SR604 Duplex Re-pickup Assembly.

Code: 1014
Description:
Power ON Jam 1
Causes:
Multi-purpose Pickup Sensor
Remedy:
SR603 Multi-purpose Tray.

Code: 1017
Description:
Power ON Jam 4
Causes:
Multi-purpose Pickup Sensor
Remedy:
SR603 Multi-purpose Tray.

Code: 1054
Description:
Power ON Jam 1
Causes:
Registration sensor/Fixing Delivery Sensor/Delivery Sensor
Remedy:
SR604/SR607/SR608 Registration Area to Delivery Area.

Code: 1055
Description:
Power ON Jam 2
Causes:
Registration sensor/Fixing Delivery Sensor/Delivery Sensor
Remedy:
SR604/SR607/SR608 Registration Area to Cartridge Cartridge to Fixing Roller Area.

Code: 1056
Description:
Power ON Jam 3
Causes:
Registration sensor/Fixing Delivery Sensor/Delivery Sensor
Remedy:
SR604/SR607/SR608 Registration Area to Cartridge Cartridge to Fixing Roller Area.

Code: 1057
Description:
Power ON Jam 4
Causes:
Registration sensor/Fixing Delivery Sensor/Delivery Sensor
Remedy:
SR604/SR607/SR608 Registration Area to Delivery Area.

Code: 1095
Description:
Power ON Jam 2
Causes:
Registration sensor/Fixing Delivery Sensor/Delivery Sensor
Remedy:
SR604/SR607/SR608 Duplex Re-pickup Assembly.

Code: 10D5
Description:
Power ON Jam 2
Causes:
Registration sensor/Fixing Delivery Sensor/Delivery Sensor
Remedy:
SR604/SR607/SR608 Registration Area to Delivery Area Duplex Re-pickup Assembly.

Code: 1118
Description:
Door Open Jam1
Causes:
Registration sensor/Multi-purpose Pickup Sensor
Remedy:
SR604/SR603 Cassette1/Multi-purpose Tray.

Code: 1158
Description:
Door Open Jam1
Causes:
Registration sensor/Fixing Delivery Sensor/Delivery Sensor
Remedy:
SR604/SR607/SR608 Registration Area to Delivery Area.

Code: 1198
Description:
Door Open Jam1
Causes:
Registration sensor/Fixing Delivery Sensor/Delivery Sensor
Remedy:
SR604/SR607/SR608 Duplex Re-pickup Assembly.

Code: 11D8
Description:
Door Open Jam1
Causes:
Registration sensor/Fixing Delivery Sensor/Delivery Sensor
Remedy:
SR604/SR607/SR608 Registration Area to Delivery Area Duplex Re-pickup Assembly.

Code: E000-0000
Description:
Error in temperature rising of Fixing Assembly
Causes:
Temperature of the Fixing Assembly did not reach a certain temperature within the specified period of time.
Remedy:
1. Check the connector connection between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

Code: E001-0000
Description:
Abnormal high temperature of Fixing Assembly
Causes:
It was detected that the temperature of the Fixing Assembly was abnormally high.
Remedy:
1. Check the connector connection between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

Code: E001-0001
Description:
Abnormal high temperature of Fixing Assembly
Causes:
It was detected that the temperature of the Fixing Assembly (Sub Thermistor) was abnormally high.
Remedy:
1. Check the connector connection between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

Code: E003-0000
Description:
Abnormal low temperature of Fixing Assembly
Causes:
It was detected that the temperature of the Fixing Assembly was abnormally low.
Remedy:
1. Check the connector connection between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

Code: E003-0001
Description:
It was detected that the temperature of the Fixing Assembly (Sub Thermistor) was abnormally low.
Causes:
It was detected that the temperature of the Fixing Assembly (Sub Thermistor) was abnormally low.
Remedy:
1. Check the connector connection between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

Code: E004-0000
Description:
Error in fixing power supply drive circuit
Causes:
The zero cross signal was not detected for the specified period of time or more.
Remedy:
1. Check the connector connection between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

Code: E012-0000
Description:
Black Drum Motor error
Causes:
An error in the initial operation of the Drum Motor was detected.
Remedy:
1. Reconnect the connector of the Main Motor. 2. Replace the Engine Controller PCB.

Code: E012-0001
Description:
Black Drum Motor error
Causes:
Rotation error of the Drum Motor was detected.
Remedy:
1. Reconnect the connector of the Main Motor. 2. Replace the Engine Controller PCB.

Code: E014-0000
Description:
Error in startup of the Main Motor
Causes:
Revolution of the Main Motor did not reach the specified value.
Remedy:
1. Check the connector connection between the Main Motor and the Engine Controller PCB. 2. Replace the Main Motor. 3. Replace the Engine Controller PCB.

Code: E014-0001
Description:
Error in startup of the Main Motor
Causes:
Revolution of the Main Motor was out of the specified range.
Remedy:
1. Check the connector connection between the Main Motor and the Engine Controller PCB. 2. Replace the Main Motor. 3. Replace the Engine Controller PCB.

Code: E015-0000
Description:
Error in Developing Disengagement Motor
Causes:
The engine detected an error in the Developing Disengagement Motor.
Remedy:
1. Check the harnesses/connectors connecting the Developing Disengagement Switch, the Developing Disengagement Solenoid and the Engine Controller PCB. 2. Check that the Developing Disengagement Switch is properly installed. 3. Replace the Developing Disengagement Switch. 4. Replace the Developing Disengagement Solenoid. 5. Replace the Engine Controller PCB.

Code: E015-0001
Description:
Cassette 1 lift-up error
Causes:
After lift-up of the Lifting Plate of the cassette of the host machine started, ON status of the Lifter Sensor of the cassette of the host machine was not detected within the specified period of time.
Remedy:
1. While the cassette of the host machine is removed, turn ON the power and insert the cassette, then check the operation sound of the motor. When there is operation sound of the motor, check if the Lifting Plate has been lifted up. When the Lifting Plate has been lifted up: 1-1. Check that the Lifter Sensor of the cassette of the host machine is properly installed. 1-2. Check the harness/connector between the Engine Controller PCB and the Lifter Sensor. 1-3. Replace the Lifter Sensor.1-4. Replace the Engine Controller PCB. When the Lifting Plate has not been lifted up: 2-1. Check the condition of the gear at the host machine side (missing teeth, swing). 2-2. Check the harness/connector between the Engine Controller PCB and the Lifter Solenoid of the cassette of the host machine. 2-3. Replace the Lifter Solenoid. 2-4. Replace the Pickup Motor of the cassette of the host machine. 2-5. Replace the Driver PCB. 2-6. Replace the Engine Controller PCB. When there is no operation sound of the motor, check the followings: 3-1. Check the harness/connector between the Engine Controller PCB and the Pickup Motor of the cassette of the host machine. 3-2. Check the condition of the gear at the host machine side (missing teeth, swing). 3-3. Check the Pickup Motor. 3-4. Replace the Driver PCB. 3-5. Replace the Engine Controller PCB.

Code: E015-0002
Description:
Cassette 2 lift-up error
Causes:
After lift-up of the Lifting Plate of the 1-Cassette Unit started, ON status of the Lifter Sensor of the 1-Cassette Unit was not detected within the specified period of time.
Remedy:
1. While the cassette of the 1-Cassette Unit is removed, turn ON the power and insert the cassette, then check the operation sound of the motor. When there is operation sound of the motor, check if the Lifting Plate has been lifted up. When the Lifting Plate has been lifted up: 1-1. Check that the Lifter Sensor of the Cassette Unit is properly installed. 1-2. Check the harness/connector between the Engine Controller PCB and the Lifter Sensor. 1-3. Replace the Lifter Sensor. 1-4. Replace the Cassette Feeder Driver PCB. 1-5. Replace the Engine Controller PCB. When the Lifting Plate has not been lifted up: 2-1. Check the condition of the gear of the Cassette Unit (missing teeth, swing). 2-2. Check the harness/connector between the Engine Controller PCB and the Lifter Solenoid of the Cassette Unit. 2-3. Replace the Lifter Solenoid. 2-4. Replace the Pickup Motor of the Cassette Unit. 2-5. Replace the Cassette Feeder Driver PCB. 2-6. Replace the Engine Controller PCB. When there is no operation sound of the motor, check the followings: 3-1. Check the harness/connector between the Engine Controller PCB and the Pickup Motor of the Cassette Unit. 3-2. Check the condition of the gear at the Cassette Unit side (missing teeth, swing). 3-3. Replace the Pickup Motor. 3-4. Replace the Cassette Feeder Driver PCB. 3-5. Replace the Engine Controller PCB.

Code: E020-0000
Description:
Density Sensor error
Causes:
An error in the Density Sensor was detected.
Remedy:
1. Check the remaining toner level. 2. Replace the Toner Cartridge. 3. Check the harness/connector between the Color Displacement/Density Sensor and the Engine Controller PCB. 4. Replace the Color Displacement/Density Sensor. 5. Replace the ITB. 6. Replace the Engine Controller PCB.

Code: E021-1000
Description:
Yellow Developing Motor rotation error
Causes:
It was judged that the Developing Motor did not rotate.
Remedy:
1. Check the harness/connector between the Developing Motor and the Engine Controller PCB. 2. Replace the Developing Motor. 3. Replace the Driver PCB. 4. Replace the Engine Controller PCB.

Code: E021-1001
Description:
Magenta Developing Motor rotation error
Causes:
It was judged that the Developing Motor did not rotate.
Remedy:
1. Check the harness/connector between the Developing Motor and the Engine Controller PCB. 2. Replace the Developing Motor. 3. Replace the Driver PCB. 4. Replace the Engine Controller PCB.

Code: E021-1002
Description:
Cyan Developing Motor rotation error
Causes:
It was judged that the Developing Motor did not rotate.
Remedy:
1. Check the harness/connector between the Developing Motor and the Engine Controller PCB. 2. Replace the Developing Motor. 3. Replace the Driver PCB. 4. Replace the Engine Controller PCB.

Code: E021-1003
Description:
Black Developing Motor rotation error
Causes:
It was judged that the Developing Motor did not rotate.
Remedy:
1. Check the harness/connector between the Developing Motor and the Engine Controller PCB. 2. Replace the Developing Motor. 3. Replace the Driver PCB. 4. Replace the Engine Controller PCB.

Code: E021-2000
Description:
Error in startup of the Yellow Developing Motor
Causes:
Revolution of the Developing Motor did not reach the specified value.
Remedy:
1. Check the harness/connector between the Developing Motor and the Engine Controller PCB. 2. Replace the Developing Motor. 3. Replace the Driver PCB. 4. Replace the Engine Controller PCB.

Code: E021-2001
Description:
Error in startup of the Magenta Developing Motor
Causes:
Revolution of the Developing Motor did not reach the specified value.
Remedy:
1. Check the harness/connector between the Developing Motor and the Engine Controller PCB. 2. Replace the Developing Motor. 3. Replace the Driver PCB. 4. Replace the Engine Controller PCB.

Code: E021-2002
Description:
Error in startup of the Cyan Developing Motor
Causes:
Revolution of the Developing Motor did not reach the specified value.
Remedy:
1. Check the harness/connector between the Developing Motor and the Engine Controller PCB. 2. Replace the Developing Motor. 3. Replace the Driver PCB. 4. Replace the Engine Controller PCB.

Code: E021-2003
Description:
Error in startup of the Black Developing Motor
Causes:
Revolution of the Developing Motor did not reach the specified value.
Remedy:
1. Check the harness/connector between the Developing Motor and the Engine Controller PCB. 2. Replace the Developing Motor. 3. Replace the Driver PCB. 4. Replace the Engine Controller PCB.

Code: E052-0000
Description:
Duplex Feed Unit absent error
Causes:
Connection of the Duplex Feed Unit was not correct.
Remedy:
1. Reinstall the Duplex Feed Unit.

Code: E066-0000
Description:
Environment Sensor error
Causes:
An error in the Environment Sensor was detected.
Remedy:
1. Check the harness/connection of the Environment Sensor and the Engine Controller PCB. 2. Replace the Environment Sensor. 3. Replace the Engine Controller PCB.

Code: E078-0000
Description:
Primary transfer disengagement mechanism error
Causes:
Primary transfer disengagement mechanism did not work properly.
Remedy:
1. Check the harnesses/connectors connecting the Primary Transfer Disengagement Switch, the Primary Transfer Disengagement Solenoid and the Engine Controller PCB. 2. Replace the Primary Transfer Disengagement Switch. 3. Replace the Primary Transfer Disengagement Solenoid. 4. Replace the Engine Controller PCB.

Code: E100-0000
Description:
Yellow scanner area failure
Causes:
Error in the Scanner Motor, Laser Unit, or BD detection in the yellow scanner area
Remedy:
1. Check the harness/FFC/connector between the Laser Unit and the Engine Controller PCB. 2. Replace the FFC. 3. Replace the Laser Unit. 4. Replace the Engine Controller PCB.

Code: E100-0001
Description:
Magenta scanner area failure
Causes:
Error in the Scanner Motor, Laser Unit, or BD detection in the magenta scanner area
Remedy:
1. Check the harness/FFC/connector between the Laser Unit and the Engine Controller PCB. 2. Replace the FFC. 3. Replace the Laser Unit. 4. Replace the Engine Controller PCB.

Code: E100-0002
Description:
Cyan scanner area failure
Causes:
Error in the Scanner Motor, Laser Unit, or BD detection in the cyan scanner area
Remedy:
1. Check the harness/FFC/connector between the Laser Unit and the Engine Controller PCB. 2. Replace the FFC. 3. Replace the Laser Unit. 4. Replace the Engine Controller PCB.

Code: E100-0003
Description:
Black scanner area failure
Causes:
Error in the Scanner Motor, Laser Unit, or BD detection in the black scanner area
Remedy:
1. Check the harness/FFC/connector between the Laser Unit and the Engine Controller PCB. 2. Replace the FFC. 3. Replace the Laser Unit. 4. Replace the Engine Controller PCB.

Code: E110-0000
Description:
Primary pseudo BD correction error
Causes:
The scanner failed to be Ready within 3 seconds after start of pseudo BD control.
Remedy:
1. Check that the engine test print is properly printed. 2. Check the FFC between the Main Controller PCB and the Engine Controller PCB. 3. Replace the Main Controller PCB.

Code: E194-0000
Description:
CPR Sensor error
Causes:
An error in the CPR Sensor was detected.
Remedy:
1. Replace the Toner Cartridge. 2. Check the harness/connector between the Color Displacement/Density Sensor and the Engine Controller PCB. 3. Replace the Color Displacement/Density Sensor Unit. 4. Replace the Engine Controller PCB. 5. Replace the ITB Unit.

Code: E196-0000
Description:
Engine Controller error
Causes:
Update of the Engine Controller was failed. (RFU mode right after the startup)
Remedy:
1. Replace the Engine Controller PCB.

Code: E198-0000
Description:
Engine Controller memory failure
Causes:
Error in the nonvolatile memory on the Engine Controller PCB
Remedy:
1. Turn OFF and then ON the power and check if the symptom occurs again. 2. Replace the Engine Controller PCB.

Code: E202-0001
Description:
CIS Unit HP error (outward)
Causes:
The CIS Unit did not move to HP even it moved backward. Reader HP Sensor error, Reader Motor error, CIS Unit error
Remedy:
1. Replace the Reader HP Sensor. 2. Replace the Reader Motor. 3. Replace the CIS Unit. 4. Replace the Reader Unit.

Code: E202-0002
Description:
CIS Unit HP error (homeward)
Causes:
The CIS Unit did not move to HP even it moved forward. Reader HP Sensor error, Reader Motor error, CIS Unit error
Remedy:
1. Replace the Reader HP Sensor. 2. Replace the Reader Motor. 3. Replace the CIS Unit. 4. Replace the Reader Unit.

Code: E246-0000
Description:
System error
Causes:
System error
Remedy:
Contact the sales company.

Code: E247-0000
Description:
System error
Causes:
System error
Remedy:
Contact the sales company.

Code: E302-0001
Description:
Shading error
Causes:
When the light intensity is below the reference level at shading
Remedy:
1. Disconnect and then connect the Flexible Cable. 2. Replace the Flexible Cable. 3. Replace the CIS Unit. 4. Replace the Main Controller PCB (PCB2).

Code: E302-0002
Description:
Shading error
Causes:
Image sampling for shading was not completed.
Remedy:
1. Turn OFF and then ON the main power. 2. Check the connection of the harness. 3. Replace the Main Controller PCB. 4. Replace the Reader Unit.

Code: E350-0000
Description:
System error
Causes:
System error
Remedy:
Contact the sales company.

Code: E354-0000
Description:
System error
Causes:
System error
Remedy:
Contact the sales company.

Code: E355-0000
Description:
System error
Causes:
System error
Remedy:
Contact the sales company.

Code: E355-0004
Description:
System error
Causes:
System error
Remedy:
Contact the sales company.

Code: E355-0005
Description:
System error
Causes:
System error
Remedy:
Contact the sales company.

Code: E732-0000
Description:
Scanner communication error
Causes:
Scanner communication error
Remedy:
1. Install the set of the controller firmware. 2. Replace the Main Controller PCB.

Code: E733-0000
Description:
Printer communication error
Causes:
Communication error between the Engine Controller PCB and the Main Controller PCB occurred.
Remedy:
1. Check the connector connection between the Engine Controller PCB and the Main Controller PCB. 2. Install the set of the controller firmware. 3. Replace the Main Controller PCB. 4. Replace the Engine Controller PCB.

Code: E743-0000
Description:
DDI communication error
Causes:
Software sequence error
Remedy:
1. Turn OFF and then ON the main power.

Code: E805-0005
Description:
Sub Fan error
Causes:
The Sub Fan was locked for a specified consecutive period of time.
Remedy:
1. Check the connection of the Sub Fan. 2. Replace the Sub Fan.

Code: E806-0000
Description:
Main Fan error
Causes:
The Main Fan was locked for a specified consecutive period of time.
Remedy:
1. Check the connection of the Main Fan. 2. Replace the Main Fan.

Code: E808-0000
Description:
Low-voltage power supply failure detection
Causes:
Printer detected low-voltage power supply failure.
Remedy:
1. Replace the Engine Controller PCB.

Code: E840-0000
Description:
Pressure release mechanism error
Causes:
An error in pressure release mechanism of the Fixing Assembly was detected.
Remedy:
1. Replace the Fixing Assembly. 2. Replace the Fixing Motor.

Post a Comment

0 Comments